Published on October 11th, 2018 | by Guest0
Bypass Verification of Google Account with Samsung FRP Bypass APK
There is no doubt it can be frustrating as to sign in your device after reset. The worst part is that most of us enter random data and do not take note of what we have entered. So, the whole process becomes much more difficult. This is where we must think about Samsung FRP Bypass APK.
The problem is that before checking your account, you cannot click on the “Next” button at the bottom right of the display. Google verification page, not you. Fortunately, today we are going to be showing some of the best ways to bypass this page. And get back into your device without having to go through this irritating process.
How to use Samsung FRP Bypass APK
First, we are going to look at a tool that known as the “Factory Reset Bypass Protection Tool”. Perhaps the best tool for the job. One of the main reasons for using this tool is that it has been developed specifically for Samsung bypass Google verify. So, you can have faith when using it.
By following the steps we have provided below. You will be able to ignore the Google verification page in just a few seconds and with no problems at all. It is worth noting that in order to use this method, you need to have a USB cable.
Step 1: First of all, download the “Samsung FRP Bypass APK “on your computer and transfer to a USB flash drive.
Step 2: Assuming you have just factory reset the device. You will be asked to select a language. Go ahead and do it before touching “Start”.
Step 3: Next, you will be asked to insert a SIM card or check if the SIM card is faulty. This step is not important for the time being thus simply touching the “Skip”.
Step 4: On the following display, you are asked to connect to a Wi-Fi network. Connect to the home router before clicking “Next”.
Step 5: Next, you will be asked to accept the ULA (User License Agreement). Simply select the “Yes” box and click “Next” to continue.
Step 6: Now, this is the part where Google will ask you to verify your account. Connect an OTG cable to your Android device and connect the USB flash drive from the beginning of the method.
Step 7: When the Android device detects that a USB flash drive has been connected, a file manager will open. Browse the flash drive and locate the FRP file that has the file extension “.APK”.
Step 8: After finding the file. Just tap on it, tap the “Install”, and tap on the “Open”.
Step 9: Now you will pass to the “Settings” application and from there, scroll down “Backup and Restore”. Tap on it, and then select the “Factory data reset” option, followed by finally tapping the “Delete all”.
Step 10: The device will now reset device again. But this time, you will not be required to enter Google verification information.
As can be said this method is by far one of the easiest available. Within minutes, you were able to get rid of the verification page and successfully bypass Google verify with Samsung FRP Bypass APK. However, if you do not have access to an OTG cable then do not worry, there is another method available to you.