Published on September 6th, 2018 | by Guest0
How Does a Pressure Washer Work
Pressure washer is one of the best ways to get rid of nasty stuff and dirt. No matter how old the stains are, a pressure washer can clear everything in just one go. There are cases, where public stairs can become extremely dirty, and no amount of soap and water can clean them. The constant use and atmospheric changes can leave permanent marks on the surface. The best and most effective use of this problem is by using a pressure washer. This way you can get rid to any kind of mess in just a few seconds, with minimum effort required.
Here are the details, how a electric pressure washer work.
Why use water?
We all know that water is the best cleaning agent. Want anything to be super clean, with no harsh chemicals involved, try using water, obviously it is not the best solution for all conditions, you need to use chemicals, soap etc. for getting tough stains out. Now first we will start with why water is a good cleaning agent. Thankfully, there is a scientific explanation for it. basically, water molecules have electrically charge polarity. For those who do not know the meaning, polarity means that one molecule is positively charged, whilst the other one is negatively charged. because of this characteristic, they tend to stick to things.
What pressure water does?
Although water is a very good cleaning agent, it cannot clean every stain all by itself. Sometimes it requires soap and scrubbing, and sometimes if the conditions are really bad, scrubbing will not work. Basically, in the pressure water technique. Water is pressured and then sprayed from a distance. It increases the kinetic energy of the water molecules. There is a water pump that accelerates the water molecules and increases their pressure. The water hose is used for spraying water to the target. There are different fittings available for attaching at the end of the hose so that the required area can be cleaned accordingly.
Now, let’s talk about the parts of the pressure washer.
1. A water inlet
Obviously, it is one of the most important parts of pressure water. A hose is attached from the water source to the pressure washer. Normally, there are filters attached inside the hose to stop any kind of dirt or other material to get in. the main reason to do so is that the water is coming out with a lot of pressure from the other end and a small amount of dirt can cause a lot of damage.
2. An electric motor
There is something required the whole process started. it is required to use the pressure washer in the places where electricity is not available.
3. Water pump
Something is required to increase the water pressure, and water pump is used for that. It is controlled or processed by the electric motor. It is more of like a hand pump, the only difference is that is run by the electric motor.
4. A high-pressure hose
The hose is required to point the water in the direction of whatever you have to clean. It is crucial to have a hose for pressure washing. A hose is basically used to transfer water in a specific pressure level from inlet to power washer . While choosing a hose, consider the material; it should be durable and must have enough length to do outdoor cleaning tasks.