Engineering

Published on July 7th, 2020 | by Sumit Bhowal

0

Top 6 most common plumbing problems

It’s very common to face plumbing problems. And we are damn sure that you have also face them. And then you have called a plumber. But don’t you know that you will also sort out some easy plumbing problems. You just have to know the right way to do it. As it’s very difficult to find a plumber in San Mateo. So, in this article, we are showing some 10 most common plumbing problems and their super easy fixing methods.

1. Dripping faucets

A dripping faucet is the most common problem faced by everyone. As it’s so irritating and distract us from our work. It is a waste of water as well as money. Because every drop of water is costly. It’s unimaginable how much water is wasted by dripping faucet every year.

The main reason behind it is the worn off, torn off, stiffing off the internal washer. You can easily fix it with the right tools.

2. Slow draining sink

This problem is mostly seen in the kitchen. Because the kitchen sink contains an oily fatty substance and food remnants as well. These things block the sink or make the water supply tough. This kind of the same problem is seen in the bathroom. In the bathroom, the main reason for blockage is hairs or shampoo covers. These things make the water supply very difficult.

You can tackle them by cleaning the drain through various methods. These methods are:

  • Plunger
  • Pouring down baking soda
  • Vinegar
  • Chemical clog remover
  • Plumber’s snake

3. Clogged bath or shower drain

There are various reasons behind the closed bathroom drain, sink, or bathtub. But the main reason is hair and soap. And it creates a lot more problems if you’re ignoring this. So can use a plumber’s snake or use a drain guard to catch the hair.

You can also use a plunger by adding petroleum jelly on the one side. Make sure that there is enough water in the drain so that plunger is easily submerged in the water.

4. Clogged toilet

A toilet is clogged by the blockage of paper or human waste. You can fix it by using a plunger or plumber’s snake. But if you feel that it’s out of your control then you must call a plumber. He will manage it perfectly.

5. Faulty water heater

You can’t identify it until you’re taking a shower and suddenly the water comes out is cold. There can be many reasons behind a faulty water heater. But the main reason is the pilot may go out, the build-up of sediments in the tank, and thermostat, etc. You can check it by yourself but if you don’t understand anything then you must have to call a plumber. He will fix it as he’s an expert and has a deep knowledge of them.

6. Low water pressure

When you’re opening a tap and the water flows out very slowly instead of fast speed. Then it is the problem of low water pressure. This problem is generally seen in old houses or buildings. It is caused by leaking pipes or worn etc. But the main reason behind it is the build-up of sediments and minerals deposit in the aerator. You can fix it by cleaning the aerator through vinegar. You can use a toothbrush dipped with vinegar to clean it or you can also leave the aerator dipped in vinegar overnight.

There are various methods to solve or fix some plumbing problems. As we have to provide an easy way for plumber in Thousand Oaks. If you feel any kind of plumbing related issue then you can contact Mr. Rooter Plumbing of Atlanta. We are providing you with our best services at affordable prices. It will be our pleasure if you give us a chance to serve you.

Like this post? Share with your friends.
Share on Facebook
Facebook
0Tweet about this on Twitter
Twitter
Share on LinkedIn
Linkedin
Share on Reddit
Reddit
0Share on Tumblr
Tumblr
0Share on VK
VK
Email this to someone
email

Tags: , ,


About the Author

Sumit Bhowal

An Internet addict and a MASTAN , Also a lazy Freelancer . I don't try to reinvent the wheel I just like to soak things in Steroid's :p Thanks (y)



Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top ↑